From litteken at snf.stanford.edu Fri Jun 6 09:59:18 2003 From: litteken at snf.stanford.edu (litteken at snf.stanford.edu) Date: Jun 6, 2003 9:59:18 AM Subject: Problem wafersaw 2003-06-06 09:59:16: Report Problem for wafersaw Message-ID: Very difficult to remove/attach dicing blade. Blade currently removed From booth at snf.stanford.edu Sun Jun 8 11:09:08 2003 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jun 8, 2003 11:09:08 AM Subject: Shutdown wafersaw 2003-06-08 11:09:07: Report Shutdown for wafersaw Message-ID: Changing problem report to a Shutdown to prevent more damage to spindle. From booth at snf.stanford.edu Tue Jun 10 09:13:58 2003 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jun 10, 2003 9:13:58 AM Subject: Shutdown wafersaw 2003-06-08 11:09:07: Report Clear for wafersaw Message-ID: Al cleaned up dings on spindle shaft, and wiped off grit from dried slurry on blade and spindle shaft. Now blades mount & dismount smoothly. From booth at snf.stanford.edu Tue Jun 10 09:14:23 2003 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jun 10, 2003 9:14:23 AM Subject: Problem wafersaw 2003-06-06 09:59:16: Report Clear for wafersaw Message-ID: see shutdown From glopez at snf.stanford.edu Mon Jun 16 12:19:58 2003 From: glopez at snf.stanford.edu (glopez at snf.stanford.edu) Date: Jun 16, 2003 12:19:58 PM Subject: Shutdown wafersaw 2003-06-16 12:19:57: Report Shutdown for wafersaw Message-ID: Light bulb seems to be burned out From booth at snf.stanford.edu Mon Jun 16 12:28:25 2003 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jun 16, 2003 12:28:25 PM Subject: Shutdown wafersaw 2003-06-16 12:19:57: Report Clear for wafersaw Message-ID: found bad connection in lamp circuit. Lamp Is working normally again. From ychliu at snf.stanford.edu Wed Jun 18 10:47:48 2003 From: ychliu at snf.stanford.edu (ychliu at snf.stanford.edu) Date: Jun 18, 2003 10:47:48 PM Subject: Problem wafersaw 2003-06-18 22:47:47: Report Problem for wafersaw Message-ID: NO more double-sided adhesive tape or blue tape. From seoung at snf.stanford.edu Thu Jun 19 01:55:00 2003 From: seoung at snf.stanford.edu (seoung at snf.stanford.edu) Date: Jun 19, 2003 1:55:00 PM Subject: Shutdown wafersaw 2003-06-19 13:54:59: Report Shutdown for wafersaw Message-ID: I acidently pressed "Stop" button while the machine was cutting a wafer. From booth at snf.stanford.edu Thu Jun 19 02:38:00 2003 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jun 19, 2003 2:38:00 PM Subject: Shutdown wafersaw 2003-06-19 13:54:59: Report Clear for wafersaw Message-ID: reset machine because the firmware locked up. From booth at snf.stanford.edu Thu Jun 19 02:38:29 2003 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jun 19, 2003 2:38:29 PM Subject: Problem wafersaw 2003-06-18 22:47:47: Report Clear for wafersaw Message-ID: Mary is going to bring in a roll of dicing tape. From bob101 at snf.stanford.edu Fri Jun 20 09:31:12 2003 From: bob101 at snf.stanford.edu (bob101 at snf.stanford.edu) Date: Jun 20, 2003 9:31:12 AM Subject: Problem wafersaw 2003-06-20 09:31:11: Report Problem for wafersaw Message-ID: Electrical micrometer which is used to measure thickness of wafer does not work. Might be no power any more. From booth at snf.stanford.edu Fri Jun 20 10:23:29 2003 From: booth at snf.stanford.edu (Len Booth) Date: Fri, 20 Jun 2003 10:23:29 -0700 Subject: Problem wafersaw 2003-06-20 09:31:11: Report Problem for wafersaw Message-ID: <3EF34311.15A5C314@snf.stanford.edu> Bob101 - There is nothing wrong with the wafersaw calipers. If the calipers are not used for several minutes, it automatically shuts off the LCD display. If you move the slide, the display comes alive again. Len From booth at snf.stanford.edu Fri Jun 20 02:18:07 2003 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jun 20, 2003 2:18:07 PM Subject: Problem wafersaw 2003-06-20 09:31:11: Report Clear for wafersaw Message-ID: From mtang at snf.stanford.edu Mon Jun 23 11:44:43 2003 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Jun 23, 2003 11:44:43 AM Subject: Shutdown wafersaw 2003-06-23 11:44:42: Coral not talking to wafersaw Message-ID: It's the training session from hell... The system doesn't think it has power, pressure, or water, although it does. I think the wafersaw is not talking to the coral box... From booth at snf.stanford.edu Mon Jun 23 12:52:36 2003 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jun 23, 2003 12:52:36 PM Subject: Shutdown wafersaw 2003-06-23 11:44:42: Report Clear for wafersaw Message-ID: restarted system & went thru calib routines. From erics at snf.stanford.edu Wed Jun 25 01:42:19 2003 From: erics at snf.stanford.edu (erics at snf.stanford.edu) Date: Jun 25, 2003 1:42:19 PM Subject: Shutdown wafersaw 2003-06-25 13:42:18: Report Shutdown for wafersaw Message-ID: upon hitting the auto cut feature I realized that I wanted a single cut, trying to abort the process I hit the emergency stop button. this has caused the dicing saw to "lock up". talked to Len and he asked that I shut down the tool and write this report any questions call Eric at 408-605-4439 From booth at snf.stanford.edu Wed Jun 25 02:13:02 2003 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jun 25, 2003 2:13:02 PM Subject: Shutdown wafersaw 2003-06-25 13:42:18: Report Clear for wafersaw Message-ID: system firmware locked up when user tried to abort autocut. Restarted system. From yue at snf.stanford.edu Thu Jun 26 11:53:26 2003 From: yue at snf.stanford.edu (yue at snf.stanford.edu) Date: Jun 26, 2003 11:53:26 AM Subject: Problem wafersaw 2003-06-26 11:53:22: Report Problem for wafersaw Message-ID: No double sided tape available to attach pieces to dummy wafer. From booth at snf.stanford.edu Thu Jun 26 02:08:29 2003 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jun 26, 2003 2:08:29 PM Subject: Problem wafersaw 2003-06-26 11:53:22: Report Clear for wafersaw Message-ID: Mary will find a source for the double sticky tape.