From eenriquez at snf.stanford.edu Wed Mar 1 20:21:11 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 1 Mar 2006 20:21:11 -0800 Subject: Problem wafersaw SNF 2006-02-28 16:39:23: air pressure reads "low" Message-ID: Adjusted the air pressure switch From avkearne at snf.stanford.edu Wed Mar 1 23:43:39 2006 From: avkearne at snf.stanford.edu (avkearne at snf.stanford.edu) Date: Wed, 1 Mar 2006 23:43:39 -0800 Subject: Comment wafersaw SNF 2006-03-01 23:43:39: Digital calipers Message-ID: The digital calipers are not working From avkearne at snf.stanford.edu Thu Mar 2 01:55:10 2006 From: avkearne at snf.stanford.edu (avkearne at snf.stanford.edu) Date: Thu, 2 Mar 2006 01:55:10 -0800 Subject: Comment wafersaw SNF 2006-03-02 01:55:09: "Fast" button Message-ID: The "fast" button does not seem to be working From mtang at stanford.edu Thu Mar 2 07:05:33 2006 From: mtang at stanford.edu (Mary Tang) Date: Thu, 02 Mar 2006 07:05:33 -0800 Subject: Comment wafersaw SNF 2006-03-02 01:55:09: "Fast" button In-Reply-To: <200603020955.k229tCCF022213@smtp1.Stanford.EDU> References: <200603020955.k229tCCF022213@smtp1.Stanford.EDU> Message-ID: <440709BD.6050007@stanford.edu> Sorry... This has stopped working, which makes for an annoying session. I'll check, as I thought I'd left the wafersaw in yellow for this very reason. We have scheduled for the K&S expert to come in and do an annual tune up of the system -- he was due to arrive yesterday, but has apparently post-poned until the 20th. My apologies. Mary avkearne at snf.stanford.edu wrote: >The "fast" button does not seem to be working > > > -- Mary X. Tang, Ph.D. Stanford Nanofabrication Facility CIS Room 136, Mail Code 4070 Stanford, CA 94305 (650)723-9980 mtang at stanford.edu http://snf.stanford.edu From langrock at snf.stanford.edu Fri Mar 3 16:17:36 2006 From: langrock at snf.stanford.edu (langrock at snf.stanford.edu) Date: Fri, 3 Mar 2006 16:17:36 -0800 Subject: Comment wafersaw SNF 2006-03-03 16:17:36: Fast button not working Message-ID: The "fast" button doesn't seem to be doing anything right now. From sjo at snf.stanford.edu Mon Mar 6 00:52:48 2006 From: sjo at snf.stanford.edu (sjo at snf.stanford.edu) Date: Mon, 6 Mar 2006 00:52:48 -0800 Subject: Problem wafersaw SNF 2006-03-06 00:52:48: Caliper is missing battery; messy workplace Message-ID: The digital caliper is not working because it is missing a battery. The blue wafer backing tape is empty too, but I know that can be found in the stock room. Also, the workplace around the wafersaw was rather messy. One of the wooden boxes with a stainless hub sat on the shelf instead inside the red box. The red box was on the table instead on the shelf. The hub tool was on the table, as were both calipers and the instructions. Someone really had forgotten to clean up! Since I forgot to pack my own blade, I couldn't use the wafersaw after all. From mtang at snf.stanford.edu Mon Mar 6 09:51:29 2006 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Mon, 6 Mar 2006 09:51:29 -0800 Subject: Shutdown wafersaw SNF 2006-03-06 09:51:28: Maintenance needs space by the sinks Message-ID: Wafersaw is OK (well, aside from the comments already posted.) But maintenance folk need clear space for an emergency repair, so the wafersaw will be kept down until they are done. From uli at snf.stanford.edu Mon Mar 6 10:36:23 2006 From: uli at snf.stanford.edu (uli at snf.stanford.edu) Date: Mon, 6 Mar 2006 10:36:23 -0800 Subject: Shutdown wafersaw SNF 2006-03-06 09:51:28: Maintenance needs space by the sinks Message-ID: Mike Dickey said it is ok to use the wafersaw again. From mtang at snf.stanford.edu Mon Mar 6 15:19:07 2006 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Mon, 6 Mar 2006 15:19:07 -0800 Subject: Comment wafersaw SNF 2006-03-06 15:19:07: Broken saw blade inside Message-ID: Sorry, there's a broken F3530 blade inside (no more new ones in the stockroom, though plenty of the resnoid blades.) New F3530's have been on order -- no ETA as yet. From chaseonline at chaseonline.chase.com Fri Mar 17 17:17:50 2006 From: chaseonline at chaseonline.chase.com (Chase Card Services Online Services Team) Date: Fri, 17 Mar 2006 19:17:50 -0600 Subject: Unlock and renew your account Message-ID: <200603180117.k2I1HoIc030280@genie.c-cubedmedia.com> An HTML attachment was scrubbed... URL: From eenriquez at snf.stanford.edu Wed Mar 22 23:24:20 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 22 Mar 2006 23:24:20 -0800 Subject: Comment wafersaw SNF 2006-02-01 15:29:02: y knob slow Message-ID: Field service replaced main logic board. From eenriquez at snf.stanford.edu Wed Mar 22 23:24:36 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 22 Mar 2006 23:24:36 -0800 Subject: Problem wafersaw SNF 2006-02-17 13:04:42: "Fast" is slow! Message-ID: Field service replaced main logic board. From eenriquez at snf.stanford.edu Wed Mar 22 23:24:56 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 22 Mar 2006 23:24:56 -0800 Subject: Comment wafersaw SNF 2006-03-02 01:55:09: "Fast" button Message-ID: Field service replaced main logic board. From eenriquez at snf.stanford.edu Wed Mar 22 23:27:20 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 22 Mar 2006 23:27:20 -0800 Subject: Comment wafersaw SNF 2006-03-03 16:17:36: Fast button not working Message-ID: Field service replaced main logic board. From eenriquez at snf.stanford.edu Wed Mar 22 23:28:34 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 22 Mar 2006 23:28:34 -0800 Subject: Problem wafersaw SNF 2006-03-06 00:52:48: Caliper is missing battery; messy workplace Message-ID: Replaced caliper. From eenriquez at snf.stanford.edu Wed Mar 22 23:31:44 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 22 Mar 2006 23:31:44 -0800 Subject: Problem wafersaw SNF 2006-02-21 17:41:24: have some problems. Message-ID: Field service replaced main logic board. Also replaced burn indicator light. From eenriquez at snf.stanford.edu Wed Mar 22 23:35:37 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 22 Mar 2006 23:35:37 -0800 Subject: Problem wafersaw SNF 2006-02-21 19:12:47: Strange cut Message-ID: Field service replaced main logic board.. Also adjusted servo motors. Adjusted the x-axis drive assy. It was hitting the bottom of the pan. Also adjusted the water nozzle position. It was hitting the y-axis drive shaft assy. From eenriquez at snf.stanford.edu Thu Mar 23 00:00:20 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Thu, 23 Mar 2006 00:00:20 -0800 Subject: Comment wafersaw SNF 2006-03-01 23:43:39: Digital calipers Message-ID: Please use the dial caliper From eenriquez at snf.stanford.edu Thu Mar 23 00:00:38 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Thu, 23 Mar 2006 00:00:38 -0800 Subject: Comment wafersaw SNF 2006-01-18 11:04:14: reminder: turn off gas Message-ID: OK From mtang at stanford.edu Thu Mar 23 06:53:02 2006 From: mtang at stanford.edu (Mary Tang) Date: Thu, 23 Mar 2006 06:53:02 -0800 Subject: Comment wafersaw SNF 2006-03-01 23:43:39: Digital calipers In-Reply-To: <200603230800.k2N80NYM023258@smtp3.Stanford.EDU> References: <200603230800.k2N80NYM023258@smtp3.Stanford.EDU> Message-ID: <4422B64E.6010909@stanford.edu> Wups! Sorry, I forgot to clear this -- I picked up some batteries a while ago and placed an extra inside the box for the digital calipers. Mary eenriquez at snf.stanford.edu wrote: >Please use the dial caliper > > > -- Mary X. Tang, Ph.D. Stanford Nanofabrication Facility CIS Room 136, Mail Code 4070 Stanford, CA 94305 (650)723-9980 mtang at stanford.edu http://snf.stanford.edu From avkearne at snf.stanford.edu Tue Mar 28 01:37:23 2006 From: avkearne at snf.stanford.edu (avkearne at snf.stanford.edu) Date: Tue, 28 Mar 2006 01:37:23 -0800 Subject: Comment wafersaw SNF 2006-03-28 01:37:22: Water turned off Message-ID: The water on the saw was turned off, breaking my own personal resin blade and damaging my specimen. Please leave water on. Thanks. From mdickey at snf.stanford.edu Thu Mar 30 08:47:52 2006 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Thu, 30 Mar 2006 08:47:52 -0800 Subject: Shutdown wafersaw SNF 2006-03-30 08:47:52: CLeaning Message-ID: The saw is not available due to parts being cleaned in the bottle wash sink From jhaydon at snf.stanford.edu Thu Mar 30 10:46:29 2006 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Thu, 30 Mar 2006 10:46:29 -0800 Subject: Shutdown wafersaw SNF 2006-03-30 08:47:52: CLeaning Message-ID: Saw ready for use