From huangzb at snf.stanford.edu Fri Nov 3 19:11:10 2006 From: huangzb at snf.stanford.edu (huangzb at snf.stanford.edu) Date: Fri, 3 Nov 2006 19:11:10 -0800 Subject: Problem wafersaw SNF 2006-11-03 19:11:10: emergency light is broken, run out of razor blade Message-ID: From sjo at snf.stanford.edu Sat Nov 4 18:19:18 2006 From: sjo at snf.stanford.edu (sjo at snf.stanford.edu) Date: Sat, 4 Nov 2006 18:19:18 -0800 Subject: Problem wafersaw SNF 2006-11-04 18:19:18: 2 lights out Message-ID: EMERGENCY STOP and STOP button lights are now both burned out - no wonder, given that they are on 24/7 whenever the machine is in standby. Maybe there's a suitable LED replacement to fix this for good. From eenriquez at snf.stanford.edu Mon Nov 6 07:45:21 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 6 Nov 2006 07:45:21 -0800 Subject: Problem wafersaw SNF 2006-11-04 18:19:18: 2 lights out Message-ID: replaced burnt out light bulbs. From eenriquez at snf.stanford.edu Mon Nov 6 07:45:30 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 6 Nov 2006 07:45:30 -0800 Subject: Problem wafersaw SNF 2006-11-03 19:11:10: emergency light is broken, run out of razor blade Message-ID: replaced burnt out light bulbs. From sjo at snf.stanford.edu Wed Nov 8 01:17:17 2006 From: sjo at snf.stanford.edu (sjo at snf.stanford.edu) Date: Wed, 8 Nov 2006 01:17:17 -0800 Subject: Comment wafersaw SNF 2006-11-08 01:17:16: Needs more blue tape & a default blade Message-ID: Saw works well, but is out of blue tape, and has no default blade on the hub. I therefore left the hub disassembled the way I found it. From jimkruger at snf.stanford.edu Thu Nov 9 17:55:56 2006 From: jimkruger at snf.stanford.edu (jimkruger at snf.stanford.edu) Date: Thu, 9 Nov 2006 17:55:56 -0800 Subject: Problem wafersaw SNF 2006-11-09 17:55:55: missing "standby blade" Message-ID: The standby blade is missing and the stock room is closed. I left the spindle dried but empty, contrary to standard practice. From mtang at snf.stanford.edu Tue Nov 14 09:16:03 2006 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Tue, 14 Nov 2006 09:16:03 -0800 Subject: Problem wafersaw SNF 2006-11-09 17:55:55: missing "standby blade" Message-ID: Installed. From mtang at snf.stanford.edu Tue Nov 14 09:16:34 2006 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Tue, 14 Nov 2006 09:16:34 -0800 Subject: Comment wafersaw SNF 2006-11-08 01:17:16: Needs more blue tape & a default blade Message-ID: Blue tape is available in the stockroom, next to blades. New blade placed at the station. From mvikram at snf.stanford.edu Thu Nov 16 12:42:35 2006 From: mvikram at snf.stanford.edu (mvikram at snf.stanford.edu) Date: Thu, 16 Nov 2006 12:42:35 -0800 Subject: Problem wafersaw SNF 2006-11-16 12:42:34: blade broken Message-ID: "Spindle overload" error when making test cut. Replaced new blade and worked alright. Default blade might be broken. From mtang at snf.stanford.edu Fri Nov 17 14:38:25 2006 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Fri, 17 Nov 2006 14:38:25 -0800 Subject: Problem wafersaw SNF 2006-11-16 12:42:34: blade broken Message-ID: The blade at the station looked OK, but cut terribly (we tossed it). New blade seems fine. From chen0622 at snf.stanford.edu Sat Nov 18 16:44:13 2006 From: chen0622 at snf.stanford.edu (chen0622 at snf.stanford.edu) Date: Sat, 18 Nov 2006 16:44:13 -0800 Subject: Problem wafersaw SNF 2006-11-18 16:44:13: after finished the work, my dicing blade could not be taken out Message-ID: the dicing balde could not take it out From chen0622 at snf.stanford.edu Sat Nov 18 17:15:57 2006 From: chen0622 at snf.stanford.edu (chen0622 at snf.stanford.edu) Date: Sat, 18 Nov 2006 17:15:57 -0800 Subject: Problem wafersaw SNF 2006-11-18 17:15:56: I got the blade out, it is no problem now Message-ID: It is no problem now. My own mistake. From yeh at snf.stanford.edu Sun Nov 19 22:30:39 2006 From: yeh at snf.stanford.edu (yeh at snf.stanford.edu) Date: Sun, 19 Nov 2006 22:30:39 -0800 Subject: Comment wafersaw SNF 2006-11-19 22:30:38: vac pin not at 6'oclock position Message-ID: From eenriquez at snf.stanford.edu Mon Nov 20 07:28:14 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 20 Nov 2006 07:28:14 -0800 Subject: Problem wafersaw SNF 2006-11-18 16:44:13: after finished the work, my dicing blade could not be taken out Message-ID: User fixed it. From eenriquez at snf.stanford.edu Mon Nov 20 07:28:45 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 20 Nov 2006 07:28:45 -0800 Subject: Problem wafersaw SNF 2006-11-18 17:15:56: I got the blade out, it is no problem now Message-ID: User error. From chen0622 at snf.stanford.edu Wed Nov 29 21:39:30 2006 From: chen0622 at snf.stanford.edu (chen0622 at snf.stanford.edu) Date: Wed, 29 Nov 2006 21:39:30 -0800 Subject: Problem wafersaw SNF 2006-11-29 21:39:29: could not turn on the spindle Message-ID: it shows "Overload", when the "spindle on" button is pressed. From eenriquez at snf.stanford.edu Thu Nov 30 10:02:23 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Thu, 30 Nov 2006 10:02:23 -0800 Subject: Shutdown wafersaw SNF 2006-11-30 10:02:20: Needs new spindle Message-ID: Spindle crashed. From eenriquez at snf.stanford.edu Thu Nov 30 11:59:59 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Thu, 30 Nov 2006 11:59:59 -0800 Subject: Comment wafersaw SNF 2006-11-30 11:59:59: Saw will be down until Jan 3 Message-ID: Need to replace the spindle assembly. Part and field service will not be available until 12/18.