From cbaxter at snf.stanford.edu Thu Aug 2 15:27:20 2007 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Thu, 2 Aug 2007 15:27:20 -0700 Subject: Shutdown wafersaw SNF 2007-07-24 14:26:02: The y-axis limit is off and displays an error Message-ID: F/S re-teach x,y,z and theate position and also, found the rear x limit switch plunger was reverse. He also perform annual pm on the tool. From cbaxter at snf.stanford.edu Thu Aug 2 15:27:26 2007 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Thu, 2 Aug 2007 15:27:26 -0700 Subject: Problem wafersaw SNF 2007-07-24 14:52:41: Y-axis limit reached.... Message-ID: From mtang at snf.stanford.edu Thu Aug 2 15:48:23 2007 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Thu, 2 Aug 2007 15:48:23 -0700 Subject: Shutdown wafersaw SNF 2007-08-02 15:48:23: Chuck grounded error Message-ID: Field service repaired the system. During checkout, we got a "chuck ground" error during the height calibration. Uh oh. From cbaxter at snf.stanford.edu Fri Aug 3 08:29:13 2007 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Fri, 3 Aug 2007 08:29:13 -0700 Subject: Shutdown wafersaw SNF 2007-08-02 15:48:23: Chuck grounded error Message-ID: F/S put insulator on the theata mounting bracket to insulate from the chasis ground. From davegage at snf.stanford.edu Mon Aug 6 14:22:46 2007 From: davegage at snf.stanford.edu (davegage at snf.stanford.edu) Date: Mon, 6 Aug 2007 14:22:46 -0700 Subject: Comment wafersaw SNF 2007-08-06 14:22:46: Cover Message-ID: The black cover that protects the user from the spinning blade is cracked through -- the crack is near the finger bolt on the right that is used to secure the cover into place. From mtang at snf.stanford.edu Wed Aug 8 15:11:56 2007 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Wed, 8 Aug 2007 15:11:56 -0700 Subject: Problem wafersaw SNF 2007-08-08 15:11:55: Water spraying Message-ID: The system is quite usable, but be aware that the water sprays out the right side. I can't seem to adjust it. Please cover and/or cleanup while using the system until we can take a closer look at it. Thanks. From mtang at snf.stanford.edu Fri Aug 17 12:43:38 2007 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Fri, 17 Aug 2007 12:43:38 -0700 Subject: Problem wafersaw SNF 2007-08-08 15:11:55: Water spraying Message-ID: Some enterprising person used duct tape to cut down on the spray. We still need to fix the housing some time -- but at least for now, users are not going to get wet. From mtang at snf.stanford.edu Fri Aug 17 12:45:11 2007 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Fri, 17 Aug 2007 12:45:11 -0700 Subject: Comment wafersaw SNF 2007-08-17 12:45:10: Issues.... Message-ID: Cover is cracked and needs to be reglued. The blade removal tool is missing one of its two pins. The lamp on the "On" switch is burned out. From yeh at snf.stanford.edu Thu Aug 23 19:03:16 2007 From: yeh at snf.stanford.edu (yeh at snf.stanford.edu) Date: Thu, 23 Aug 2007 19:03:16 -0700 Subject: Comment wafersaw SNF 2007-08-23 19:03:15: STOP button light not working Message-ID: