From auprabhu at snf.stanford.edu Tue Mar 10 10:01:14 2009 From: auprabhu at snf.stanford.edu (auprabhu at snf.stanford.edu) Date: Tue, 10 Mar 2009 10:01:14 -0700 Subject: Shutdown wafersaw SNF 2009-03-10 10:01:13: spindle overload Message-ID: in the middle of the dice, spindle stopped with OVERLOAD warning. From eenriquez at snf.stanford.edu Tue Mar 10 10:47:33 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 10 Mar 2009 10:47:33 -0700 Subject: Shutdown wafersaw SNF 2009-03-10 10:01:13: spindle overload Message-ID: User loaded a thinner wafer. Now cutting with no problems. From yeh at snf.stanford.edu Wed Mar 11 14:39:38 2009 From: yeh at snf.stanford.edu (yeh at snf.stanford.edu) Date: Wed, 11 Mar 2009 14:39:38 -0700 Subject: Problem wafersaw SNF 2009-03-11 14:39:37: N2 gun leaking badly Message-ID: From mtang at snf.stanford.edu Wed Mar 11 16:18:11 2009 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Wed, 11 Mar 2009 16:18:11 -0700 Subject: Problem wafersaw SNF 2009-03-11 14:39:37: N2 gun leaking badly Message-ID: Gun repaired (thanks Jim!) From mtang at snf.stanford.edu Wed Mar 11 16:20:04 2009 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Wed, 11 Mar 2009 16:20:04 -0700 Subject: Problem wafersaw SNF 2009-03-11 16:20:03: Damaged hub flange set Message-ID: The deep blade resinoid flange set is damaged. C'mon people, be nice to the toys! This is a $500 part! From mdickey at snf.stanford.edu Thu Mar 12 07:29:49 2009 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Thu, 12 Mar 2009 07:29:49 -0700 Subject: Problem wafersaw SNF 2009-03-12 07:29:49: N2 gun Message-ID: Need to replace N2 line to the gun....no N2 gun available at the moment From eenriquez at snf.stanford.edu Thu Mar 12 08:14:59 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Thu, 12 Mar 2009 08:14:59 -0700 Subject: Problem wafersaw SNF 2009-03-12 07:29:49: N2 gun Message-ID: Replaced the N2 gun hose. From yeh at snf.stanford.edu Tue Mar 17 18:28:26 2009 From: yeh at snf.stanford.edu (yeh at snf.stanford.edu) Date: Tue, 17 Mar 2009 18:28:26 -0700 Subject: Comment wafersaw SNF 2009-03-17 18:28:25: n2 gun pressure low Message-ID: From sdogbe at snf.stanford.edu Thu Mar 26 12:56:37 2009 From: sdogbe at snf.stanford.edu (sdogbe at snf.stanford.edu) Date: Thu, 26 Mar 2009 12:56:37 -0700 Subject: Comment wafersaw SNF 2009-03-26 12:56:36: Blade Message-ID: Blade fitting too tight to unscrew. Need to change damaged blade. From mtang at snf.stanford.edu Thu Mar 26 18:01:20 2009 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Thu, 26 Mar 2009 18:01:20 -0700 Subject: Problem wafersaw SNF 2009-03-11 16:20:03: Damaged hub flange set Message-ID: Cesar cleaned up and lubed the flange. Still need to find o-rings, but it works now. From mtang at snf.stanford.edu Thu Mar 26 18:13:39 2009 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Thu, 26 Mar 2009 18:13:39 -0700 Subject: Shutdown wafersaw SNF 2009-03-26 18:13:38: Flange screw overtightened? Message-ID: Yes, the blade is broken, but more importantly, I can't remove the flange screw! Maybe it was way overtightened. This needs bigger tools and muscles. From mtang at snf.stanford.edu Thu Mar 26 18:21:30 2009 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Thu, 26 Mar 2009 18:21:30 -0700 Subject: Comment wafersaw SNF 2009-03-26 18:21:30: Sorry, I meant Flange NUT Message-ID: From eenriquez at snf.stanford.edu Fri Mar 27 08:58:10 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Fri, 27 Mar 2009 08:58:10 -0700 Subject: Shutdown wafersaw SNF 2009-03-26 18:13:38: Flange screw overtightened? Message-ID: Removed the flanged nut. Labeled the nut installation tool with the correct direction to turn the nut. Reinstalled the old blade. Please replace before using. From eenriquez at snf.stanford.edu Fri Mar 27 08:58:20 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Fri, 27 Mar 2009 08:58:20 -0700 Subject: Comment wafersaw SNF 2009-03-26 18:21:30: Sorry, I meant Flange NUT Message-ID: Archived From eenriquez at snf.stanford.edu Fri Mar 27 08:58:25 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Fri, 27 Mar 2009 08:58:25 -0700 Subject: Comment wafersaw SNF 2009-03-26 12:56:36: Blade Message-ID: Removed the flanged nut. Labeled the nut installation tool with the correct direction to turn the nut. Reinstalled the old blade. Please replace before using.