From ycjun at snf.stanford.edu Fri Nov 6 13:45:36 2009 From: ycjun at snf.stanford.edu (ycjun at snf.stanford.edu) Date: Fri, 6 Nov 2009 13:45:36 -0800 Subject: Comment wafersaw SNF 2009-11-06 13:45:36: No power Message-ID: "Emergency Stop" button light does not go on/off. Display shows "No Power". When I press "Emergency Stop" and "Stop" buttoon, it does not start to count down. So, I could not use the system today.. From mtang at snf.stanford.edu Mon Nov 9 11:46:59 2009 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Mon, 9 Nov 2009 11:46:59 -0800 Subject: Problem wafersaw SNF 2009-11-09 11:46:58: Stop switch is intermittent Message-ID: The Emergency Stop switch works, but doesn't light up. The Stop switch lights up when it's supposed to, but only intermittently works. From egarnett at snf.stanford.edu Tue Nov 10 09:22:05 2009 From: egarnett at snf.stanford.edu (egarnett at snf.stanford.edu) Date: Tue, 10 Nov 2009 09:22:05 -0800 Subject: Problem wafersaw SNF 2009-11-10 09:22:05: chuck vacuum not working Message-ID: vacuum pump seems to be running but chuck vacuum won't come on. unload still gives gas feed. can't dice without chuck vacuum. From mdickey at snf.stanford.edu Tue Nov 10 10:36:11 2009 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Tue, 10 Nov 2009 10:36:11 -0800 Subject: Problem wafersaw SNF 2009-11-10 09:22:05: chuck vacuum not working Message-ID: user reports vacuum is working From mtang at snf.stanford.edu Tue Nov 10 12:57:44 2009 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Tue, 10 Nov 2009 12:57:44 -0800 Subject: Problem wafersaw SNF 2009-11-09 11:46:58: Stop switch is intermittent Message-ID: Mike fixed it -- the Stop switch works! From mtang at snf.stanford.edu Tue Nov 10 12:59:30 2009 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Tue, 10 Nov 2009 12:59:30 -0800 Subject: Comment wafersaw SNF 2009-11-10 12:59:30: Emergency Stop light is off noiw Message-ID: The Emergency Stop light should be on when the machine is off. Lamp was replaced, but still the same problem. Otherwise, the machine seems to be fine. From gyama at snf.stanford.edu Thu Nov 19 16:54:09 2009 From: gyama at snf.stanford.edu (gyama at snf.stanford.edu) Date: Thu, 19 Nov 2009 16:54:09 -0800 Subject: Problem wafersaw SNF 2009-11-19 16:54:09: water gun hose came off Message-ID: From mdickey at snf.stanford.edu Fri Nov 20 07:26:18 2009 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Fri, 20 Nov 2009 07:26:18 -0800 Subject: Problem wafersaw SNF 2009-11-19 16:54:09: water gun hose came off Message-ID: Hose reconnected