From fumin at stanford.edu Fri Jul 1 04:32:55 2005 From: fumin at stanford.edu (Fu-Min Wang) Date: Fri, 1 Jul 2005 04:32:55 -0700 Subject: timer doesn't countdown Message-ID: <1120217575.42c529e7c0900@webmail.stanford.edu> When I start to enable wafersaw, the previous user left the N2 on. After push the stop button, the timer doesn't count down. From joshuar at stanford.edu Sat Jul 16 13:29:50 2005 From: joshuar at stanford.edu (Josh Ratchford) Date: Sat, 16 Jul 2005 13:29:50 -0700 Subject: missing 2 segments of vacuum chuck pin Message-ID: <1121545790.42d96e3e44c93@webmail.stanford.edu> Hello, Two segments of the vacuum chuck pin are missing. Are these pieces stored somewhere? I would like to dice some small chips. Thank you, Josh From mtang at snf.stanford.edu Sat Jul 16 14:02:46 2005 From: mtang at snf.stanford.edu (Mary Tang) Date: Sat, 16 Jul 2005 14:02:46 -0700 (PDT) Subject: missing 2 segments of vacuum chuck pin In-Reply-To: <1121545790.42d96e3e44c93@webmail.stanford.edu> Message-ID: Hi Josh -- My sneaking suspicion is that someone may have inadvertently partly unscrewed the segements and that the innermost ones are still inside the vacuum chuck. At least, this has happened before (several times.) That little red plastic toolbox behind the wafersaw (which contains the resinoid blade hubs) also contains a long metal screw thread. This is Elmer's solution -- just screw this into the vacuum pin slot and fish out the pin segments. Please let us know if this doesn't work. Otherwise, I would recomment taping (if you can) your small piece on a larger wafer. GOod luck! Mary On Sat, 16 Jul 2005, Josh Ratchford wrote: > Hello, > > Two segments of the vacuum chuck pin are missing. Are these pieces stored > somewhere? I would like to dice some small chips. > > Thank you, > > Josh > > > From hra at stanford.edu Mon Jul 25 17:30:50 2005 From: hra at stanford.edu (Hyejun Ra) Date: Mon, 25 Jul 2005 17:30:50 -0700 Subject: today's reservation from 6pm-midnight cancelled Message-ID: <200507260030.j6Q0Uo9E001183@smtp3.Stanford.EDU> Samples not ready. Sorry for the late notice. Hyejun Ra -------------- next part -------------- An HTML attachment was scrubbed... URL: From maurice at snf.stanford.edu Fri Jul 29 14:47:47 2005 From: maurice at snf.stanford.edu (Maurice Stevens) Date: Fri, 29 Jul 2005 14:47:47 -0700 Subject: Blades ordered Message-ID: <42EAA403.6070408@snf.stanford.edu> Wafersaw blades are being ordered. Dave does not have a delivery date yet. We will keep you posted. -m -- maurice at stanford.edu Maurice Stevens Stanford Nanofabrication Facility CIS Room 142, Mail Code 4070 Stanford, CA 94305 P. (650)725-3660 F. (650)725.6278