From josep at stanford.edu Tue Nov 6 10:11:28 2012 From: josep at stanford.edu (Jose Padovani) Date: Tue, 6 Nov 2012 10:11:28 -0800 Subject: 1-4pm released Message-ID: <8DB1A8F3-A5E3-4988-9B70-2F6C52D4CC17@stanford.edu> Wafer not ready. Sorry for the inconvenience. -Jose From eperalta at stanford.edu Wed Nov 28 23:54:32 2012 From: eperalta at stanford.edu (Edgar Peralta) Date: Wed, 28 Nov 2012 23:54:32 -0800 Subject: weird offset problem Message-ID: The tool is doing that thing again where it shifts about 6mm from the desired position. i.e. You go do height calibration, point microscope to the center (0,0 position) and after hitting enter it moves the head towards positive Y values all the way to the end of the chuck and tries to do the height calibration there. Does anyone know how to fix this? I can't afford to wait until tomorrow :( -- *Edgar A. Peralta * *Ph.D. Candidate, *Stanford University Department of Applied Physics *M*: 954.940.2700 -------------- next part -------------- An HTML attachment was scrubbed... URL: From chen0622 at yahoo.com Thu Nov 29 11:59:18 2012 From: chen0622 at yahoo.com (Chih-Chang Chen) Date: Thu, 29 Nov 2012 11:59:18 -0800 (PST) Subject: wafersaw reservation released Nov. 30 from 8:00 to 11:30 AM Message-ID: <1354219158.86914.YahooMailNeo@web122402.mail.ne1.yahoo.com> An HTML attachment was scrubbed... URL: