From mislam at snf.stanford.edu Thu May 18 16:25:42 2006 From: mislam at snf.stanford.edu (mislam at snf.stanford.edu) Date: Thu, 18 May 2006 16:25:42 -0700 Subject: Problem wbdiff SNF 2006-05-18 16:25:41: HCl bath set temp and time wrong Message-ID: set temp for HCl bath is changed to 60C instead of 70C. Time is changed to 0.2min instead of 10 min. Uli and few of us tried to change the set parameters back but were unsucessful. From ratiug at snf.stanford.edu Tue May 23 12:22:32 2006 From: ratiug at snf.stanford.edu (ratiug at snf.stanford.edu) Date: Tue, 23 May 2006 12:22:32 -0700 Subject: Problem wbdiff SNF 2006-05-23 12:22:31: HCl tank fail to drain Message-ID: unable to change the chemicals From jhaydon at snf.stanford.edu Fri May 26 06:44:11 2006 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Fri, 26 May 2006 06:44:11 -0700 Subject: Problem wbdiff SNF 2006-05-23 12:22:31: HCl tank fail to drain Message-ID: controller won't let you drain untill temp is below 50 C From jhaydon at snf.stanford.edu Fri May 26 06:45:20 2006 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Fri, 26 May 2006 06:45:20 -0700 Subject: Problem wbdiff SNF 2006-05-18 16:25:41: HCl bath set temp and time wrong Message-ID: I have reset the temperature and time settings From lindaw at snf.stanford.edu Sat May 27 10:30:50 2006 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Sat, 27 May 2006 10:30:50 -0700 Subject: Comment wbdiff SNF 2006-05-27 10:30:49: HCl hot pot must be below 50C to drain Message-ID: Controller set point for drain temp now seems to be set at 50C. From lindaw at snf.stanford.edu Sat May 27 10:54:45 2006 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Sat, 27 May 2006 10:54:45 -0700 Subject: Problem wbdiff SNF 2006-05-27 10:54:44: both hot pot timers set at 00.2, not 10.0 Message-ID: From kuanlinc at snf.stanford.edu Sat May 27 21:24:31 2006 From: kuanlinc at snf.stanford.edu (kuanlinc at snf.stanford.edu) Date: Sat, 27 May 2006 21:24:31 -0700 Subject: Problem wbdiff SNF 2006-05-27 21:24:31: Temp setting way off Message-ID: The temp setting for both hot bath are set at 60... From shott at snf.stanford.edu Sun May 28 09:51:03 2006 From: shott at snf.stanford.edu (shott at snf.stanford.edu) Date: Sun, 28 May 2006 09:51:03 -0700 Subject: Problem wbdiff SNF 2006-05-27 10:54:44: both hot pot timers set at 00.2, not 10.0 Message-ID: Timers reset to 10.0 minutes with a prewarn time of 1.0 minutes From shott at snf.stanford.edu Sun May 28 09:52:32 2006 From: shott at snf.stanford.edu (shott at snf.stanford.edu) Date: Sun, 28 May 2006 09:52:32 -0700 Subject: Problem wbdiff SNF 2006-05-27 21:24:31: Temp setting way off Message-ID: Reset H2SO4/H2O2 hotpot to 90C and HCl/H2O2 to 70C. From gyama at snf.stanford.edu Tue May 30 14:54:06 2006 From: gyama at snf.stanford.edu (gyama at snf.stanford.edu) Date: Tue, 30 May 2006 14:54:06 -0700 Subject: Shutdown wbdiff SNF 2006-05-30 14:54:05: put PR wafers into sulfuric Message-ID: will be doing a "KOH" decontam on sulfuric pot From maurice at snf.stanford.edu Tue May 30 17:39:35 2006 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 30 May 2006 17:39:35 -0700 Subject: Shutdown wbdiff SNF 2006-05-30 14:54:05: put PR wafers into sulfuric Message-ID: "KOH" decontam on sulfuric pot by gyama From jhaydon at snf.stanford.edu Wed May 31 06:29:15 2006 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Wed, 31 May 2006 06:29:15 -0700 Subject: Shutdown wbdiff SNF 2006-05-31 06:29:13: down for new dump rinser installation Message-ID: