From amroy at snf.stanford.edu Sat Mar 6 09:04:08 2010 From: amroy at snf.stanford.edu (amroy at snf.stanford.edu) Date: Sat, 6 Mar 2010 09:04:08 -0800 Subject: Problem wbgen-ctb SNF 2010-03-06 09:04:08: CTB warning light on Message-ID: I had left the CTB heater on for an overnight etch. Unfortunately, the water level reduced too much and the red warning light saying 'SAFETY CONTROL ACTIVATED' is now on. I don't know how to reset this alarm and the procedures involved. I have rinsed the bath, aspirated it and disabled the wet bench for now. From dpb167 at snf.stanford.edu Sun Mar 7 19:46:30 2010 From: dpb167 at snf.stanford.edu (dpb167 at snf.stanford.edu) Date: Sun, 7 Mar 2010 19:46:30 -0800 Subject: Shutdown wbgen-ctb SNF 2010-03-07 19:46:29: heater not working Message-ID: As the previous comment states, the safety control is activated on this bench and the bench won't heat. I'm shutting it down so it doesn't appear as usable. From jhaydon at snf.stanford.edu Mon Mar 8 08:31:03 2010 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Mon, 8 Mar 2010 08:31:03 -0800 Subject: Shutdown wbgen-ctb SNF 2010-03-07 19:46:29: heater not working Message-ID: switch reset From jhaydon at snf.stanford.edu Mon Mar 8 08:31:27 2010 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Mon, 8 Mar 2010 08:31:27 -0800 Subject: Problem wbgen-ctb SNF 2010-03-06 09:04:08: CTB warning light on Message-ID: switch reset From uli at snf.stanford.edu Fri Mar 19 10:21:09 2010 From: uli at snf.stanford.edu (uli at snf.stanford.edu) Date: Fri, 19 Mar 2010 10:21:09 -0700 Subject: Comment wbgen-ctb SNF 2010-01-23 20:28:20: water gun leaking Message-ID: fixed From uli at snf.stanford.edu Fri Mar 19 10:21:32 2010 From: uli at snf.stanford.edu (uli at snf.stanford.edu) Date: Fri, 19 Mar 2010 10:21:32 -0700 Subject: Comment wbgen-ctb SNF 2010-01-07 17:37:11: water gun leaks Message-ID: fixed