From flannery at snf.stanford.edu Sun Jul 22 09:14:18 2001 From: flannery at snf.stanford.edu (flannery at snf.stanford.edu) Date: Jul 22, 2001 9:14:18 PM Subject: Problem wbgen-hpr 2001-07-22 21:14:16: Not Heating Message-ID: There is something funky going on with both hot plates. This is the second time this has happened to me. I start a heated etch. Everything is working fine. I come back to do an intermediate step and then want to restart the etch. I turn the timer - nothing. The plate stays cold. The heat light is on, but the plate stays cold. Is there something strange going on with the timer? Very weird. Tony From jhaydon at snf.stanford.edu Mon Jul 23 04:07:48 2001 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Jul 23, 2001 4:07:48 PM Subject: Shutdown wbgen-hpr 2001-07-23 16:07:45: dead hot plate Message-ID: From jhaydon at snf.stanford.edu Mon Jul 30 01:12:55 2001 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Jul 30, 2001 1:12:55 PM Subject: Shutdown wbgen-hpr 2001-07-23 16:07:45: dead hot plate Message-ID: installed new hot plate ok to use From jhaydon at snf.stanford.edu Mon Jul 30 01:13:20 2001 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Jul 30, 2001 1:13:20 PM Subject: Problem wbgen-hpr 2001-07-22 21:14:16: Not Heating Message-ID: installed new hot plate ok to use