From michash at snf.stanford.edu Tue Feb 19 14:23:49 2008 From: michash at snf.stanford.edu (michash at snf.stanford.edu) Date: Tue, 19 Feb 2008 14:23:49 -0800 Subject: Shutdown wbgen-hpr SNF 2008-02-19 14:23:48: exhaust is not strong enough Message-ID: From mtang at snf.stanford.edu Fri Feb 22 14:33:09 2008 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Fri, 22 Feb 2008 14:33:09 -0800 Subject: Comment wbgen-hpr SNF 2008-02-22 14:33:09: Exhaust problem Message-ID: Users and others have reported intermittent problems with odors emanating from this bench when volatile chemicals are used. Maintenance is investigating. If you need to use wbgeneral and cannot use wbgaas, contact Uli for advice. From uli at snf.stanford.edu Fri Feb 22 16:54:39 2008 From: uli at snf.stanford.edu (uli at snf.stanford.edu) Date: Fri, 22 Feb 2008 16:54:39 -0800 Subject: Shutdown wbgen-hpr SNF 2008-02-19 14:23:48: exhaust is not strong enough Message-ID: From uli at snf.stanford.edu Fri Feb 22 16:55:08 2008 From: uli at snf.stanford.edu (uli at snf.stanford.edu) Date: Fri, 22 Feb 2008 16:55:08 -0800 Subject: Problem wbgen-hpr SNF 2008-02-22 16:55:08: Mario will shut it down after he is done. Message-ID: From kupnik at snf.stanford.edu Sat Feb 23 00:02:02 2008 From: kupnik at snf.stanford.edu (kupnik at snf.stanford.edu) Date: Sat, 23 Feb 2008 00:02:02 -0800 Subject: Shutdown wbgen-hpr SNF 2008-02-23 00:02:00: hotplate does not work anymore Message-ID: no power light comes on, (2 hour reset is not the problem) From jhaydon at snf.stanford.edu Mon Feb 25 14:49:20 2008 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Mon, 25 Feb 2008 14:49:20 -0800 Subject: Shutdown wbgen-hpr SNF 2008-02-23 00:02:00: hotplate does not work anymore Message-ID: replaced blown fuse From jhaydon at snf.stanford.edu Mon Feb 25 15:56:47 2008 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Mon, 25 Feb 2008 15:56:47 -0800 Subject: Problem wbgen-hpr SNF 2008-02-22 16:55:08: Mario will shut it down after he is done. Message-ID: From uli at snf.stanford.edu Tue Feb 26 13:44:44 2008 From: uli at snf.stanford.edu (uli at snf.stanford.edu) Date: Tue, 26 Feb 2008 13:44:44 -0800 Subject: Comment wbgen-hpr SNF 2007-11-30 07:00:11: found large clear puddles and yellow drops Message-ID: cleaned up From vishal at snf.stanford.edu Wed Feb 27 01:41:16 2008 From: vishal at snf.stanford.edu (vishal at snf.stanford.edu) Date: Wed, 27 Feb 2008 01:41:16 -0800 Subject: Problem wbgen-hpr SNF 2008-02-27 01:41:16: heater does not turn on. Message-ID: From gth at snf.stanford.edu Wed Feb 27 02:06:50 2008 From: gth at snf.stanford.edu (gth at snf.stanford.edu) Date: Wed, 27 Feb 2008 02:06:50 -0800 Subject: Problem wbgen-hpr SNF 2008-02-27 02:06:50: the hot plate is not coming up Message-ID: i reset and rotated dial, it is not working. i had this problem before but migrated to wb-gaas. but now this is urgent , please fix this. i think the temp knob is sticky cheers G From jhaydon at snf.stanford.edu Wed Feb 27 11:47:03 2008 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Wed, 27 Feb 2008 11:47:03 -0800 Subject: Problem wbgen-hpr SNF 2008-02-27 02:06:50: the hot plate is not coming up Message-ID: replaced fuse if it happens again I will replace controller board From jhaydon at snf.stanford.edu Wed Feb 27 11:47:13 2008 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Wed, 27 Feb 2008 11:47:13 -0800 Subject: Problem wbgen-hpr SNF 2008-02-27 01:41:16: heater does not turn on. Message-ID: