From jaehlee at snf.stanford.edu  Sun Dec 23 09:32:07 2012
From: jaehlee at snf.stanford.edu (jaehlee at snf.stanford.edu)
Date: Sun, 23 Dec 2012 17:32:07 -0000
Subject: Comment wbgen-hpr SNF 2012-09-03 16:44:49: stain mark left on the
 left side of the hot plate
Message-ID: <19937910.4.1346715890231.JavaMail.coral@shine>



From uli at snf.stanford.edu  Sun Dec 23 09:32:07 2012
From: uli at snf.stanford.edu (uli at snf.stanford.edu)
Date: Sun, 23 Dec 2012 17:32:07 -0000
Subject: Comment wbgen-hpr SNF 2012-07-16 13:42:26: Oops, the ceramic is
 actually broken. nevermind.
Message-ID: <1107827.36.1347301166306.JavaMail.coral@shine>

archived


From uli at snf.stanford.edu  Sun Dec 23 09:32:07 2012
From: uli at snf.stanford.edu (uli at snf.stanford.edu)
Date: Sun, 23 Dec 2012 17:32:07 -0000
Subject: Comment wbgen-hpr SNF 2012-07-16 13:38:14:
Message-ID: <55334.37.1347301175314.JavaMail.coral@shine>

archived


From uli at snf.stanford.edu  Sun Dec 23 09:32:07 2012
From: uli at snf.stanford.edu (uli at snf.stanford.edu)
Date: Sun, 23 Dec 2012 17:32:07 -0000
Subject: Comment wbgen-hpr SNF 2012-07-16 12:28:28: Hot plate damage?
 specific?
Message-ID: <3966793.38.1347301183322.JavaMail.coral@shine>

archived


From uli at snf.stanford.edu  Sun Dec 23 09:32:07 2012
From: uli at snf.stanford.edu (uli at snf.stanford.edu)
Date: Sun, 23 Dec 2012 17:32:07 -0000
Subject: Comment wbgen-hpr SNF 2012-07-14 10:55:18: The last user didn't
 close the HF drain lid.
Message-ID: <28169467.39.1347301194331.JavaMail.coral@shine>

archived


From uli at snf.stanford.edu  Sun Dec 23 09:32:07 2012
From: uli at snf.stanford.edu (uli at snf.stanford.edu)
Date: Sun, 23 Dec 2012 17:32:07 -0000
Subject: Comment wbgen-hpr SNF 2012-06-16 00:53:02: Someone has left a
 HF Dip bottle on the cart next to the wet bench
Message-ID: <25336317.40.1347301206339.JavaMail.coral@shine>

archived


From uli at snf.stanford.edu  Sun Dec 23 09:32:07 2012
From: uli at snf.stanford.edu (uli at snf.stanford.edu)
Date: Sun, 23 Dec 2012 17:32:07 -0000
Subject: Comment wbgen-hpr SNF 2012-09-03 16:44:49: stain mark left on
 the left side of the hot plate
Message-ID: <33281259.45.1347302645415.JavaMail.coral@shine>

cleaned


From lindaw at snf.stanford.edu  Sun Dec 23 09:32:07 2012
From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu)
Date: Sun, 23 Dec 2012 17:32:07 -0000
Subject: Problem wbgen-hpr SNF 2012-11-07 10:15:07: all 4" half cassettes
 are missing from bench
Message-ID: <21928017.0.1352312108293.JavaMail.coral@shine>

there is one in wbctb and one with metal flakes all over it at wbsolvent, but all the others are missing and cannot be found anywhere in the fab. 
There are 6 full 4" wafer cassettes at wbgen.  Is it possible to cut a couple of them in half to replenish the missing  half cassettes?


From lofaolain at snf.stanford.edu  Sun Dec 23 09:32:07 2012
From: lofaolain at snf.stanford.edu (lofaolain at snf.stanford.edu)
Date: Sun, 23 Dec 2012 17:32:07 -0000
Subject: Comment wbgen-hpr SNF 2012-11-15 15:23:35: Small brown stains near
 gooseneck
Message-ID: <15521373.86.1353021815954.JavaMail.coral@shine>



From wslee at snf.stanford.edu  Sun Dec 23 09:32:07 2012
From: wslee at snf.stanford.edu (wslee at snf.stanford.edu)
Date: Sun, 23 Dec 2012 17:32:07 -0000
Subject: Comment wbgen-hpr SNF 2012-11-26 20:59:21: brown liquid splashed
 all over
Message-ID: <31029482.0.1353992361600.JavaMail.coral@shine>

There was an unknown brown liquid all over (PRX?). I cleaned it up. Please leave the benchclean for the next user.


From calarrudo at snf.stanford.edu  Sun Dec 23 09:32:07 2012
From: calarrudo at snf.stanford.edu (calarrudo at snf.stanford.edu)
Date: Sun, 23 Dec 2012 17:32:07 -0000
Subject: Problem wbgen-hpr SNF 2012-12-09 13:33:21: Beaker broke with
 chemicals on hot plate
Message-ID: <30538754.1.1355088802028.JavaMail.coral@shine>

The beaker that I had poured EKC-265 Post Etch Remover slipped out of my hands, hit the hot plate and broke into multiple pieces.  I cleaned up the spill, rinsed all areas that had the EKC-265.  I pulled the hot 
plate out of the opening and rinsed and aspirated any residual 
chemical. 
Please use the hot plate with caution because it may still be damp.
I double bagged any wipes then placed in double yellow hazardous
 waste bags and put a hazardous wasted tag on the bag.  i put the 
empty EKC bottle and the hazardous yellow bags in the pass through  for empty chemicals.
Sorry for any inconvience I may have caused anyone.