From nharjee at snf.stanford.edu Wed Sep 1 15:28:27 2010 From: nharjee at snf.stanford.edu (nharjee at snf.stanford.edu) Date: Wed, 1 Sep 2010 15:28:27 -0700 Subject: Problem wbmetal SNF 2010-09-01 15:28:26: PRX-127 hot pot has slow leak Message-ID: From uli at snf.stanford.edu Wed Sep 1 17:52:04 2010 From: uli at snf.stanford.edu (uli at snf.stanford.edu) Date: Wed, 1 Sep 2010 17:52:04 -0700 Subject: Comment wbmetal SNF 2010-09-01 17:52:04: PRS1000 was pink again! Message-ID: I rinsed the bath with PRS1000 , drained it, and refilled the bath with PRS1000. From jwpchen at snf.stanford.edu Sat Sep 4 17:05:39 2010 From: jwpchen at snf.stanford.edu (jwpchen at snf.stanford.edu) Date: Sat, 4 Sep 2010 17:05:39 -0700 Subject: Problem wbmetal SNF 2010-09-04 17:05:38: spin dryer balance Message-ID: rumbles and shakes in drying stage, can this be re-balanced? From uli at snf.stanford.edu Wed Sep 8 14:25:47 2010 From: uli at snf.stanford.edu (uli at snf.stanford.edu) Date: Wed, 8 Sep 2010 14:25:47 -0700 Subject: Problem wbmetal SNF 2010-09-01 15:28:26: PRX-127 hot pot has slow leak Message-ID: Not leaking anymore. Please report it if it starts leaking again. From ericp at snf.stanford.edu Thu Sep 16 22:02:53 2010 From: ericp at snf.stanford.edu (ericp at snf.stanford.edu) Date: Thu, 16 Sep 2010 22:02:53 -0700 Subject: Problem wbmetal SNF 2010-09-16 22:02:52: 3" cassettes all missing Message-ID: Where'd they go?? From jhaydon at snf.stanford.edu Wed Sep 22 15:07:33 2010 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Wed, 22 Sep 2010 15:07:33 -0700 Subject: Problem wbmetal SNF 2010-09-16 22:02:52: 3" cassettes all missing Message-ID: cassette found From jhaydon at snf.stanford.edu Wed Sep 22 15:09:38 2010 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Wed, 22 Sep 2010 15:09:38 -0700 Subject: Problem wbmetal SNF 2010-09-04 17:05:38: spin dryer balance Message-ID: SRD looked ok to me but if were set a the wrong speed it will wobble. The SRD will be replaced in the not to distant future. From usha at snf.stanford.edu Thu Sep 23 10:35:14 2010 From: usha at snf.stanford.edu (usha at snf.stanford.edu) Date: Thu, 23 Sep 2010 10:35:14 -0700 Subject: Problem wbmetal SNF 2010-09-23 10:35:13: Vibration while spinning Message-ID: From jcdoll at snf.stanford.edu Sun Sep 26 12:25:53 2010 From: jcdoll at snf.stanford.edu (jcdoll at snf.stanford.edu) Date: Sun, 26 Sep 2010 12:25:53 -0700 Subject: Problem wbmetal SNF 2010-09-26 12:25:52: Exhaust reading 0.75 Message-ID: Still > 0.5, but much less than any of the other wetbenches From jhaydon at snf.stanford.edu Tue Sep 28 11:28:19 2010 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Tue, 28 Sep 2010 11:28:19 -0700 Subject: Problem wbmetal SNF 2010-08-24 23:37:24: PRX127 tank sensor dead? Message-ID: sensor fixed From jhaydon at snf.stanford.edu Tue Sep 28 11:31:01 2010 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Tue, 28 Sep 2010 11:31:01 -0700 Subject: Problem wbmetal SNF 2010-09-23 10:35:13: Vibration while spinning Message-ID: some vibration on this SRD is normal. It is going to be replaced in the near future