From jhaydon at snf.stanford.edu  Thu Aug 11 15:15:35 2011
From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu)
Date: Thu, 11 Aug 2011 15:15:35 -0700
Subject: Problem wbmetal SNF 2011-05-11 16:33:51: PRX 127 and PRS 1000 Pot Problems
Message-ID: <mailman.347.1357939045.26044.wbmetal-pcs@snf.stanford.edu>

adjusted PRX 127 drain line should be faster now



From jhaydon at snf.stanford.edu  Thu Aug 11 15:16:28 2011
From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu)
Date: Thu, 11 Aug 2011 15:16:28 -0700
Subject: Problem wbmetal SNF 2010-11-03 23:45:23: PRS1000 tank sensor
Message-ID: <mailman.348.1357939045.26044.wbmetal-pcs@snf.stanford.edu>

logged



From jhaydon at snf.stanford.edu  Thu Aug 11 15:17:31 2011
From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu)
Date: Thu, 11 Aug 2011 15:17:31 -0700
Subject: Problem wbmetal SNF 2010-10-27 12:55:18: spin dryer leaving water on wafers
Message-ID: <mailman.349.1357939045.26044.wbmetal-pcs@snf.stanford.edu>

logged



From rudy at snf.stanford.edu  Wed Aug 17 15:36:52 2011
From: rudy at snf.stanford.edu (rudy at snf.stanford.edu)
Date: Wed, 17 Aug 2011 15:36:52 -0700
Subject: Comment wbmetal SNF 2011-08-17 15:36:51: SRD Rinse Cycle set to 80s
Message-ID: <mailman.350.1357939045.26044.wbmetal-pcs@snf.stanford.edu>

The rinse cycle on the SRD is currently set to 80s.  Upon attempting to turn it back to 180s, I discovered that the bottom button for changing the 100s value of the rinse time is broken.



From uli at snf.stanford.edu  Thu Aug 18 16:57:04 2011
From: uli at snf.stanford.edu (uli at snf.stanford.edu)
Date: Thu, 18 Aug 2011 16:57:04 -0700
Subject: Comment wbmetal SNF 2011-08-17 15:36:51: SRD Rinse Cycle set to 80s
Message-ID: <mailman.351.1357939045.26044.wbmetal-pcs@snf.stanford.edu>

Rinse time changed back to 180 sec, do not change!