From cbaxter at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Apr 17, 2000 Subject: Problem Clear wbmetal: changed bad solenoid for door seal. Message-ID: From cbaxter at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Apr 17, 2000 Subject: Problem Clear wbmetal: Message-ID: From mbartsch at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: mbartsch at snf.stanford.edu (mbartsch at snf.stanford.edu) Date: May 15, 2000 Subject: Problem wbmetal: RHS Dump Rinser does not work (doesn't even fill with water...dump door stuck open?) Message-ID: From cbaxter at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: May 19, 2000 Subject: Problem Clear wbmetal: reseated connector on qdr controller poor contact. Message-ID: From mcvittie at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: mcvittie at snf.stanford.edu (mcvittie at snf.stanford.edu) Date: Jul 12, 2000 Subject: Problem wbmetal: std-by H2O flow to hi on dump Lt dump rinse Message-ID: From heureux at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: heureux at snf.stanford.edu (heureux at snf.stanford.edu) Date: Jul 12, 2000 Subject: Problem wbmetal: dump rinser Message-ID: left dump rinser will not stop flowing From cbaxter at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Jul 19, 2000 Subject: Problem Clear wbmetal: repair air leak for high level sensor Message-ID: From cbaxter at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Jul 19, 2000 Subject: Problem Clear wbmetal: repair air leak and cycle QDR Message-ID: From tui3 at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: tui3 at snf.stanford.edu (tui3 at snf.stanford.edu) Date: Jul 21, 2000 Subject: Problem wbmetal: dump rinsers Message-ID: both dump rinsers dont work. From hansen at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: hansen at snf.stanford.edu (hansen at snf.stanford.edu) Date: Jul 24, 2000 Subject: Problem wbmetal: Neither dump rinser works Message-ID: It looks like someone alreadty wrote this problem up, but I wanted to put a more specific subject heading on Coral. As the subject says, neither dump rinser is responding to button presses, although there is DI water supplied to the DI fill and hand spiget. Sean Hansen 725-2990 coral login: hansen From mcvittie at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: mcvittie at snf.stanford.edu (mcvittie at snf.stanford.edu) Date: Jul 25, 2000 Subject: Problem wbmetal: Fixed Dump Rinsers-Loose wires. Jim Message-ID: From booth at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jul 27, 2000 Subject: Problem Clear wbmetal: Message-ID: From booth at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jul 27, 2000 Subject: Problem Clear wbmetal: Message-ID: From booth at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jul 27, 2000 Subject: Problem Clear wbmetal: Message-ID: From pcastle at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: pcastle at snf.stanford.edu (pcastle at snf.stanford.edu) Date: Aug 28, 2000 Subject: Problem wbmetal: wbmetal srd Message-ID: the SRD at the wet bench leaks through the door seal. We have top hold it shut when it starts From cbaxter at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Sep 6, 2000 Subject: Problem Clear wbmetal: changed fuse on controller Message-ID: From rtchang at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: rtchang at snf.stanford.edu (rtchang at snf.stanford.edu) Date: Sep 25, 2000 Subject: Problem wbmetal: right dumprinser problematic Message-ID: right dump rinser has trouble starting, and does not complete 6 cycles. From cbaxter at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Sep 28, 2000 Subject: Problem Clear wbmetal: lower air supply for bath filled.. Message-ID: From jhaydon at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Comment wbmetal SNF 2012-08-08 11:08:23: New PEEK rails have been installed Message-ID: <21813171.73.1344449304269.JavaMail.coral@shine> The teflon rails in the SRD have been replaced with ones made of PEEK . the hope is that this will cure the wafer sticking problem. It may take a few months or so before we know for sure. From bclee79 at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: bclee79 at snf.stanford.edu (bclee79 at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Comment wbmetal SNF 2012-09-06 14:25:52: Wafer Broken in SRD Message-ID: <11662730.58.1346966753465.JavaMail.coral@shine> The new PEEK rails didn't work for me. My wafer was broken yesterday. It was completely stuck in the SRD frame. I tried to use my tweezer to loosen it but once I tried to detach it from the PEEK, it was broken. From uli at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: uli at snf.stanford.edu (uli at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Comment wbmetal SNF 2012-06-23 07:56:29: Needs new chemicals Message-ID: <4525759.50.1347302747456.JavaMail.coral@shine> archived From jsegal at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: jsegal at snf.stanford.edu (jsegal at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-09-17 09:36:53: left dump rinser not working Message-ID: <6844981.15.1347899813880.JavaMail.coral@shine> From jhaydon at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Comment wbmetal SNF 2012-09-19 13:41:18: QDR work planned for Thursday 9-11 am Message-ID: <12494941.39.1348087279398.JavaMail.coral@shine> From mcherry at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: mcherry at snf.stanford.edu (mcherry at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-09-19 16:01:22: PRX127 Low Level Interlock NOT Working Message-ID: <9194993.54.1348095682717.JavaMail.coral@shine> Light is simply off. Heater can be turned on with empty bath. From jhaydon at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Shutdown wbmetal SNF 2012-09-20 09:08:25: QDR repair and hotpot work Message-ID: <1578214.77.1348157305915.JavaMail.coral@shine> From jhaydon at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Shutdown wbmetal SNF 2012-09-20 09:08:25: QDR repair and hotpot work Message-ID: <26177352.83.1348160066819.JavaMail.coral@shine> QDR valve replaced I will work on the hotpot later today From jhaydon at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-09-19 16:01:22: PRX127 Low Level Interlock NOT Working Message-ID: <3220546.84.1348163793293.JavaMail.coral@shine> possible liquid build up in bubbler line working now From jhaydon at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-09-17 09:36:53: left dump rinser not working Message-ID: <30490233.97.1348234719421.JavaMail.coral@shine> left dump rinser is working now From wslee at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: wslee at snf.stanford.edu (wslee at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-09-27 09:15:05: broken timer Message-ID: <28925173.64.1348762506104.JavaMail.coral@shine> The middle timer does not show any numbers. From jhaydon at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-09-27 09:15:05: broken timer Message-ID: <26303294.93.1348852961151.JavaMail.coral@shine> timer fixed broken wire From jsegal at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: jsegal at snf.stanford.edu (jsegal at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-10-01 11:05:11: broken wafer in resist strip Message-ID: <25812085.9.1349114711769.JavaMail.coral@shine> Wafer brike in PRS127, wafer fragment at bottom of poy From maurice at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-10-01 11:22:07: broken wafer in PRX-127 pot Message-ID: <19373442.10.1349115728100.JavaMail.coral@shine> jsegal reports broken wafer From maurice at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-10-01 11:22:07: broken wafer in PRX-127 pot Message-ID: <33111802.11.1349115858351.JavaMail.coral@shine> Uli & Maurice drained bath and removed wafer pcs From maurice at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-10-01 11:05:11: broken wafer in resist strip Message-ID: <5747181.12.1349115869469.JavaMail.coral@shine> Uli & Maurice drained bath and removed wafer pcs From jhaydon at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Comment wbmetal SNF 2012-09-19 13:41:18: QDR work planned for Thursday 9-11 am Message-ID: <24140944.62.1349446765701.JavaMail.coral@shine> work done From grahamab at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: grahamab at snf.stanford.edu (grahamab at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-10-19 19:32:41: several wafers stuck to SRD rods Message-ID: <32939868.76.1350700361838.JavaMail.coral@shine> new rods are still having the same problem as before. Was able to push the stuck wafers back down, but this is still a problem. From jhaydon at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Comment wbmetal SNF 2012-10-24 08:55:28: I have a new design for the sleevs being tested Message-ID: <22459261.69.1351094128996.JavaMail.coral@shine> Should have new part in a weel or so From ylyang at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: ylyang at snf.stanford.edu (ylyang at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-12-02 14:16:32: can not enable on coral Message-ID: <8072489.12.1354486593009.JavaMail.coral@shine> From shott at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: shott at snf.stanford.edu (shott at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-12-02 14:16:32: can not enable on coral Message-ID: <19279740.14.1354488627469.JavaMail.coral@shine> There seem to have been no errors logged by the hardware manager this aftternoon and I see that ylyang has the tool enabled at the moment. Possibly tried to enable with a stale remote client. I will follow up with him further. John From shott at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: shott at snf.stanford.edu (shott at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-12-02 15:27:02: Interlocks switched ... Message-ID: <9684209.0.1354490824014.JavaMail.coral@shine> Jim: The wbmetal interlock is in wbnitride and vice-versa. To fix this temporarily, I've swapped the IP addresses in the data base so that when you enable wbmetal, you enable the IP address of the interlock that should be in wbnitride but is actually in wbmetal. So, things work properly and we can fix this in one of two ways: 1. Leave things as they currenty are and simply swap the labels on the interlocks in the 2 machines (so that the machine name and MAC address match) and then permanently change this in both Badger and Coral and our records. 2. Phyically move the interlocks and the switch back the 2 IP addresses in Coral. Your choice .... John From jhaydon at snf.stanford.edu Fri Jan 11 13:17:23 2013 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Fri, 11 Jan 2013 21:17:23 -0000 Subject: Problem wbmetal SNF 2012-12-02 15:27:02: Interlocks switched ... Message-ID: <22514085.10.1355153983799.JavaMail.coral@shine> fixed