From beckwith at snf.stanford.edu  Tue Apr 10 13:05:10 2001
From: beckwith at snf.stanford.edu (Sharleen Beckwith)
Date: Tue, 10 Apr 2001 13:05:10 -0700 (PDT)
Subject: Spindryer leaks
In-Reply-To: <3AD31BA9.1D30F97E@snf.stanford.edu>
Message-ID: <Pine.LNX.4.04.10104101257320.15538-100000@snf.stanford.edu>


Folks:

Above the door, to the left, there is a series of lights:

            Heater (yellow)/Holding (green)
            Systen Power (red)
            Door Sealed (green)

The Door Sealed light is on when the spin/dryer is running. There is a
delay between the time the cassette stops spinning and the door un-seals.
Do NOT attempt to open the door until the green Door Sealed light goes
out. Then we won't have these problems.

Thanks.

On Tue, 10 Apr 2001, Ray Seymour wrote:

> The door seal was leaking on the spin dryer because the seal was twisted
> in the door seal track. This might have been caused by the operator
> trying to open the door before the controller released the N2 to the
> door seal. Please wait until the door is released to open before trying
> to open the door