From jhaydon at snf.stanford.edu  Thu Jul 12 14:07:08 2001
From: jhaydon at snf.stanford.edu (Jim Haydon)
Date: Thu, 12 Jul 2001 14:07:08 -0700
Subject: SRD
Message-ID: <3B4E117C.3FECE971@snf.stanford.edu>

To All:

The

kjliu at snf.stanford.edu wrote:

> spin dryer does not stop drying and door will not open.

SRD for the nonmetals wet bench should be usable for the moment but the
heat is currently not working so it will need more time to dry.

Jim




From jhaydon at snf.stanford.edu  Tue Jul 17 16:34:15 2001
From: jhaydon at snf.stanford.edu (Jim Haydon)
Date: Tue, 17 Jul 2001 16:34:15 -0700
Subject: SRD
Message-ID: <3B54CB77.9191128A@snf.stanford.edu>

To all;


The SRD on the nonmetals wet bench will be off line do to a bad
controller. It should be back up by Thursday or Friday. In the mean time
use the SRD to the right of the Nitride wet bench.

Jim  H



From jhaydon at snf.stanford.edu  Thu Jul 19 10:00:21 2001
From: jhaydon at snf.stanford.edu (Jim Haydon)
Date: Thu, 19 Jul 2001 10:00:21 -0700
Subject: SRD
Message-ID: <3B571225.94FECDCA@snf.stanford.edu>

To all:

The SRD should now be working. The current set point is 11.9 meg ohm and
it should easily be reached.

Jim H