From gcredo at snf.stanford.edu Tue Feb 3 17:43:56 2009 From: gcredo at snf.stanford.edu (gcredo at snf.stanford.edu) Date: Tue, 3 Feb 2009 17:43:56 -0800 Subject: Problem woollam SNF 2009-02-03 17:43:55: please check computer mouse Message-ID: Mouse might need to be replaced (or panel USB connector to mouse needs to be fixed). During session motion light/laser on underside of mouse turned off. Unplugged mouse cord to panel and reconnected and it was OK. From emyers at snf.stanford.edu Wed Feb 4 07:55:55 2009 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Wed, 4 Feb 2009 07:55:55 -0800 Subject: Problem woollam SNF 2009-02-03 17:43:55: please check computer mouse Message-ID: Yes this is known. The USB connections are poor. From emyers at snf.stanford.edu Wed Feb 4 07:56:17 2009 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Wed, 4 Feb 2009 07:56:17 -0800 Subject: Comment woollam SNF 2009-01-27 09:07:52: Computer irregularities Message-ID: Yes, this is known. The USB connections are poor. From emyers at snf.stanford.edu Wed Feb 4 07:57:59 2009 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Wed, 4 Feb 2009 07:57:59 -0800 Subject: Comment woollam SNF 2009-02-04 07:57:59: Mouse Problems Message-ID: Since the tool has arrived we have seen the mouse stop working and the screen flicker. This comes from the USB connections located on the top, back right area of the tool. If you unplug, then plug them back in all functionality is restored. I will look in to replacing the connector. From emyers at snf.stanford.edu Sat Feb 7 11:03:31 2009 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Sat, 7 Feb 2009 11:03:31 -0800 Subject: Problem woollam SNF 2009-02-07 11:03:30: Calibration Problem? Message-ID: The system may have been mis-calibrated. Please verify or confirm your measurements first. Remember, Never calibrate the system. From emyers at snf.stanford.edu Mon Feb 9 10:30:29 2009 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Mon, 9 Feb 2009 10:30:29 -0800 Subject: Problem woollam SNF 2009-02-07 11:03:30: Calibration Problem? Message-ID: Ran calibration. From emyers at snf.stanford.edu Mon Feb 9 10:31:15 2009 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Mon, 9 Feb 2009 10:31:15 -0800 Subject: Comment woollam SNF 2009-02-09 10:31:15: Calibrated 2/9/09 Message-ID: I had to recalibrate the system, as a bad calibration was done by mistake. Old and new number are both 284 Ang. From emyers at snf.stanford.edu Mon Feb 9 10:31:24 2009 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Mon, 9 Feb 2009 10:31:24 -0800 Subject: Comment woollam SNF 2009-01-16 14:47:28: Calibration Message-ID: archive From waqasm at snf.stanford.edu Mon Feb 9 15:23:37 2009 From: waqasm at snf.stanford.edu (waqasm at snf.stanford.edu) Date: Mon, 9 Feb 2009 15:23:37 -0800 Subject: Comment woollam SNF 2009-02-09 15:23:37: mouse/keyboard Message-ID: i tried to use the tool 3 to 3:30pm monday feb 9th. mouse and keyboard stopped working after 5 min into vase. Unplugging and replugging usb did not solve problem. From emyers at snf.stanford.edu Tue Feb 17 09:21:36 2009 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Tue, 17 Feb 2009 09:21:36 -0800 Subject: Comment woollam SNF 2009-02-09 15:23:37: mouse/keyboard Message-ID: Noted