From emyers at snf.stanford.edu Fri Sep 3 08:28:10 2010 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Fri, 3 Sep 2010 08:28:10 -0700 Subject: Problem woollam SNF 2010-07-21 14:03:43: Slow Iamp Ignition Message-ID: I have not seen this problem recently and I have not heard anyone else comment regarding the ignition of the lamp, so I am clearing the problem. From maurice at snf.stanford.edu Thu Sep 9 11:32:45 2010 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Thu, 9 Sep 2010 11:32:45 -0700 Subject: Shutdown woollam SNF 2010-09-09 11:32:45: no lamp ignition Message-ID: Intesity error From emyers at snf.stanford.edu Fri Sep 10 09:09:19 2010 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Fri, 10 Sep 2010 09:09:19 -0700 Subject: Comment woollam SNF 2010-09-10 09:09:18: Replaced Lamp Message-ID: I replaced the lamp, but it still does nopt ignite. I will contact Woollam. From emyers at snf.stanford.edu Fri Sep 10 09:10:03 2010 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Fri, 10 Sep 2010 09:10:03 -0700 Subject: Shutdown woollam SNF 2010-09-10 09:10:03: Needs Lamp Alignment Message-ID: I replaced the lamp but I did not align since I could not get the new lamp to ignite. From maurice at snf.stanford.edu Mon Sep 13 10:12:12 2010 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Mon, 13 Sep 2010 10:12:12 -0700 Subject: Shutdown woollam SNF 2010-09-09 11:32:45: no lamp ignition Message-ID: Status updated on 9/10/2010 by Ed. From emyers at snf.stanford.edu Thu Sep 16 08:32:31 2010 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Thu, 16 Sep 2010 08:32:31 -0700 Subject: Comment woollam SNF 2010-09-16 08:32:30: Igniter board not the problem Message-ID: I replaced the igniter board but there was no change. Next step is the power supply, which was also sent to us. From emyers at snf.stanford.edu Fri Sep 17 15:49:54 2010 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Fri, 17 Sep 2010 15:49:54 -0700 Subject: Shutdown woollam SNF 2010-09-10 09:10:03: Needs Lamp Alignment Message-ID: The ignitor board was replaced (not the problem) and a new power suppy was replace (which was the problem). I also replaced the lamp, aligned the beam and calibrated the system. I need to thank Woollam for sending the part for trouble shooting and even more importantly the step by step directions so that even I could make the repairs. From emyers at snf.stanford.edu Fri Sep 17 15:50:08 2010 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Fri, 17 Sep 2010 15:50:08 -0700 Subject: Comment woollam SNF 2010-09-16 08:32:30: Igniter board not the problem Message-ID: The ignitor board was replaced (not the problem) and a new power suppy was replace (which was the problem). I also replaced the lamp, aligned the beam and calibrated the system. I need to thank Woollam for sending the part for trouble shooting and even more importantly the step by step directions so that even I could make the repairs. From emyers at snf.stanford.edu Fri Sep 17 15:50:33 2010 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Fri, 17 Sep 2010 15:50:33 -0700 Subject: Comment woollam SNF 2010-09-17 15:50:33: What really happened Message-ID: The ignitor board was replaced (not the problem) and a new power suppy was replace (which was the problem). I also replaced the lamp, aligned the beam and calibrated the system. I need to thank Woollam for sending the part for trouble shooting and even more importantly the step by step directions so that even I could make the repairs. From zpatel at snf.stanford.edu Thu Sep 23 10:13:50 2010 From: zpatel at snf.stanford.edu (zpatel at snf.stanford.edu) Date: Thu, 23 Sep 2010 10:13:50 -0700 Subject: Comment woollam SNF 2010-09-23 10:13:49: Please shut off the lamp after use Message-ID: I always find the lamp source running. Please shut of the lamp source after use