From edmyers at stanford.edu  Mon Nov 10 07:30:29 2008
From: edmyers at stanford.edu (Ed Myers)
Date: Mon, 10 Nov 2008 07:30:29 -0800
Subject: Fwd: Problem woollam SNF 2008-11-10 01:21:15: Computer froze
Message-ID: <6.2.5.6.2.20081110072729.0306bdc0@stanford.edu>

All,

At times the keyboard and mouse goes dead.  The system seems to loose 
the USB connections on the top of the frame, at the back right.  If 
the system is not responding, you can unplug these connections for a 
few seconds then plug them back in.  I've had to do this a time or 
two before the keyboard and mouse start to respond.

As for shutting down the computer, there is nothing special required.

Regards,
Ed



>Delivered-To: edmyers at stanford.edu
>Delivered-To: emyers at snf.stanford.edu
>Mailing-List: contact woollam-pcs-help at snf.stanford.edu; run by ezmlm
>X-No-Archive: yes
>List-Post: <mailto:woollam-pcs at snf.stanford.edu>
>List-Help: <mailto:woollam-pcs-help at snf.stanford.edu>
>List-Unsubscribe: <mailto:woollam-pcs-unsubscribe at snf.stanford.edu>
>List-Subscribe: <mailto:woollam-pcs-subscribe at snf.stanford.edu>
>Delivered-To: mailing list woollam-pcs at snf.stanford.edu
>Subject: Problem woollam SNF 2008-11-10 01:21:15: Computer froze
>Date: Mon, 10 Nov 2008 01:21:17 -0800
>From: jrjain at snf.stanford.edu
>To: woollam-pcs at snf.stanford.edu
>
>Mouse and keyboard froze unexpectedly.  Didn't pull on 
>cords.  Computer should probably be reset, but didn't want to in 
>case there is a special shutdown procedure for the Woollam.




From ahazeghi at stanford.edu  Tue Nov 25 10:57:45 2008
From: ahazeghi at stanford.edu (Arash Hazeghi)
Date: Tue, 25 Nov 2008 10:57:45 -0800 (PST)
Subject: material model
Message-ID: <1290400577.710141227639465693.JavaMail.root@zm03.stanford.edu>

Has anyone tried creating a new .mat file (from tabulated n and k values for a given material) for for VASE sw module? It looks like the only way is to manually enter such values for all given 670 wavelengths.

Thanks,
Arash


From jimkruger at yahoo.com  Tue Nov 25 11:11:30 2008
From: jimkruger at yahoo.com (jim kruger)
Date: Tue, 25 Nov 2008 11:11:30 -0800 (PST)
Subject: material model
In-Reply-To: <1290400577.710141227639465693.JavaMail.root@zm03.stanford.edu>
Message-ID: <666718.13695.qm@web38902.mail.mud.yahoo.com>

I am sure you can "import" the data from the proper format, but I have never done it.

Or measure the material on the Woollam and save a .mat file. I have not done this either.

jim


--- On Tue, 11/25/08, Arash Hazeghi <ahazeghi at stanford.edu> wrote:

> From: Arash Hazeghi <ahazeghi at stanford.edu>
> Subject: material model
> To: woollam at snf.stanford.edu
> Date: Tuesday, November 25, 2008, 10:57 AM
> Has anyone tried creating a new .mat file (from tabulated n
> and k values for a given material) for for VASE sw module?
> It looks like the only way is to manually enter such values
> for all given 670 wavelengths.
> 
> Thanks,
> Arash