From jrjain at snf.stanford.edu Wed Sep 16 23:19:12 2009 From: jrjain at snf.stanford.edu (jrjain at snf.stanford.edu) Date: Wed, 16 Sep 2009 23:19:12 -0700 Subject: Shutdown xactix SNF 2009-09-16 23:19:11: System stuck "evacuating chambers" Message-ID: Left system enabled. Couldn't vent to remove samples. Critical samples inside chamber. From emyers at snf.stanford.edu Thu Sep 17 08:49:17 2009 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Thu, 17 Sep 2009 08:49:17 -0700 Subject: Comment xactix SNF 2009-08-28 11:59:51: Gauge Calibration Message-ID: Archived From emyers at snf.stanford.edu Thu Sep 17 08:50:09 2009 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Thu, 17 Sep 2009 08:50:09 -0700 Subject: Comment xactix SNF 2009-09-17 08:50:09: Gauge Recalibration Message-ID: Started gauge recalibration. Should be available at ~10am. From emyers at snf.stanford.edu Thu Sep 17 08:51:12 2009 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Thu, 17 Sep 2009 08:51:12 -0700 Subject: Shutdown xactix SNF 2009-09-16 23:19:11: System stuck "evacuating chambers" Message-ID: No sample in chamber or storage container around table. Started gauge calibration. From emyers at snf.stanford.edu Thu Sep 17 11:33:45 2009 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Thu, 17 Sep 2009 11:33:45 -0700 Subject: Shutdown xactix SNF 2009-09-17 11:33:44: Not reaching base pressure Message-ID: Appears the pump is failing as it is not reaching low enough pressures. From eenriquez at snf.stanford.edu Thu Sep 17 14:12:52 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Thu, 17 Sep 2009 14:12:52 -0700 Subject: Shutdown xactix SNF 2009-09-17 11:33:44: Not reaching base pressure Message-ID: Replaced the vacuum pump.