From khanh at snf.stanford.edu Fri Apr 6 19:54:22 2007 From: khanh at snf.stanford.edu (khanh at snf.stanford.edu) Date: Fri, 6 Apr 2007 19:54:22 -0700 Subject: Shutdown yes SNF 2007-04-06 19:54:22: The oven stuck at step 5 Message-ID: Couldn't open the door. Called Mario and he promised to come over from home. From khanh at snf.stanford.edu Fri Apr 6 20:48:10 2007 From: khanh at snf.stanford.edu (khanh at snf.stanford.edu) Date: Fri, 6 Apr 2007 20:48:10 -0700 Subject: Problem yes SNF 2007-04-06 20:48:09: The wafers are inside the oven. Message-ID: The wafers are very important, so called Mario for get the wfs out.. From vilanova at snf.stanford.edu Fri Apr 6 20:52:20 2007 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 6 Apr 2007 20:52:20 -0700 Subject: Shutdown yes SNF 2007-04-06 19:54:22: The oven stuck at step 5 Message-ID: all the programas were gone , I re enter all the programs and wait until the user cycled his wafers to make sure everything was fine , The system worked good , good to go. From vilanova at snf.stanford.edu Fri Apr 6 20:52:55 2007 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 6 Apr 2007 20:52:55 -0700 Subject: Problem yes SNF 2007-04-06 20:48:09: The wafers are inside the oven. Message-ID: Came back to worked on the yes oven , system good, ok to use From vincentcyw at snf.stanford.edu Sun Apr 22 10:55:29 2007 From: vincentcyw at snf.stanford.edu (vincentcyw at snf.stanford.edu) Date: Sun, 22 Apr 2007 10:55:29 -0700 Subject: Problem yes SNF 2007-04-22 10:55:29: Alarm after step 5 Message-ID: The alarm goes on after step 5. So I reseted the oven. My two wafers are still inside the oven. I have lefted two wafer boxes outside the oven. From vincentcyw at snf.stanford.edu Sun Apr 22 10:58:35 2007 From: vincentcyw at snf.stanford.edu (vincentcyw at snf.stanford.edu) Date: Sun, 22 Apr 2007 10:58:35 -0700 Subject: Shutdown yes SNF 2007-04-22 10:58:34: Alarm after step 5 Message-ID: Temperature is continuingly rising. So I shut downed the oven. From vilanova at snf.stanford.edu Mon Apr 23 08:36:02 2007 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 23 Apr 2007 08:36:02 -0700 Subject: Shutdown yes SNF 2007-04-22 10:58:34: Alarm after step 5 Message-ID: Re-ptogsm steps , let temperature go to 150o tested and cycled it a couple of times , ok to use. From gth at snf.stanford.edu Mon Apr 23 16:56:50 2007 From: gth at snf.stanford.edu (gth at snf.stanford.edu) Date: Mon, 23 Apr 2007 16:56:50 -0700 Subject: Problem yes SNF 2007-04-23 16:56:49: pressure gauge not working Message-ID: thanks mario for the temporary fix at the latch. i had a lot of issues during the weeknd. then i became an engineer with the glue and the metal piece on the latch :) however the pressure gauge is not working on the HMDS jar. so i have to use a marker to be sure that the HMDS is used please fix it thanks -gaurav From vilanova at snf.stanford.edu Tue Apr 24 11:07:53 2007 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Tue, 24 Apr 2007 11:07:53 -0700 Subject: Problem yes SNF 2007-04-23 16:56:49: pressure gauge not working Message-ID: the quantity of HMDS Used by Yes oven is so small that is very hard to see if there is HMDS Flowing to the Yes Oven chamber however if the HMDS has not reach the refill level ( yellow label about an inch to the bottom ) you should be ok. From vilanova at snf.stanford.edu Fri Apr 27 08:14:57 2007 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 27 Apr 2007 08:14:57 -0700 Subject: Problem yes SNF 2007-04-22 10:55:29: Alarm after step 5 Message-ID: tested ok , Good to use. From vilanova at snf.stanford.edu Fri Apr 27 08:16:38 2007 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 27 Apr 2007 08:16:38 -0700 Subject: Problem yes SNF 2007-04-27 08:16:38: Defective latch Message-ID: We are leaving it Under yellow Light because we still got some issues with the Door latch , make sure you closed the door properly before you "start" the cycle