From vilanova at snf.stanford.edu  Mon May  2 07:33:17 2011
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Mon, 2 May 2011 07:33:17 -0700
Subject: Problem yes SNF 2011-04-29 23:30:32: 
Message-ID: <mailman.382.1356284100.5434.yes-pcs@snf.stanford.edu>




From vilanova at snf.stanford.edu  Mon May  2 07:33:39 2011
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Mon, 2 May 2011 07:33:39 -0700
Subject: Comment yes SNF 2011-04-21 10:50:02: yes oven gloves look burnt
Message-ID: <mailman.383.1356284100.5434.yes-pcs@snf.stanford.edu>

Replaced Burned GLoves with new ones. 



From kcbalram at snf.stanford.edu  Wed May 11 21:35:26 2011
From: kcbalram at snf.stanford.edu (kcbalram at snf.stanford.edu)
Date: Wed, 11 May 2011 21:35:26 -0700
Subject: Problem yes SNF 2011-05-11 21:35:25: O ring is loose 
Message-ID: <mailman.384.1356284100.5434.yes-pcs@snf.stanford.edu>

The rubber O-ring was loose and hence the system was not able to attain vacuum...
Managed to set it temporarily and system works fine.......
Krishna



From vilanova at snf.stanford.edu  Thu May 12 07:57:47 2011
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Thu, 12 May 2011 07:57:47 -0700
Subject: Problem yes SNF 2011-05-11 21:35:25: O ring is loose 
Message-ID: <mailman.385.1356284100.5434.yes-pcs@snf.stanford.edu>

System is Fine I checked the Gasket and wasnt Loose , Cycled it once
and everything was fine , Vacuum is fine and also programms + Steps
Are ok, Ready to use.