Skip to content. | Skip to navigation

Sections
Personal tools
You are here: Home / Equipment / ExFab (previously known as nSiL) / Optomec

Optomec

The Aerosol Jet (AJ) 300 system provides the ability to print fine-feature patterns onto variety of substrates, with feature sizes as small as 10 um. The printing process is non-contact and conformal. During the AJ printing process, liquid-source ink is atomized into droplets ranging from 1 to 5 um in diameter. The droplets are entrained in a gas stream and directed into the print head where an annular flow of gas compresses the aerosol stream to a diameter as small as 10 um. The jet of aerosol droplets exits the print head at high velocity and is deposited onto the target substrate. The atomizer may be used for inks having a viscosity in the range of approximately 1 to 1000 cP. Please contact Swaroop Kommera (skommera at stanford dot edu) if you would like to learn more.
File Optomec Manual
Please find Optomec Manual attached
Optomec Manual
Optomec User Manual

Document Actions